The FLEXPOINT MVpulse laser module delivers an output power of up to 100 mW and meets all the requirements of laser courses 1 or 2. This is accomplished using an integrated microcontroller that offers a continuous wave laser in such a way that individual pulses may be generated. MV output power is five times higher than in cw operation, with the laser class specifications maintained for the entire pulse sequence. The electronics ensure that the individual pulses always stay inside the laser security conditions, should the input signal fluctuate. Input pulses that are too long can be”shortened.” If the pulse sequences are too fast, the controller then forces the necessary pauses.
With control electronic equipment, the FLEXPOINT MVpulse fulfills two Important standards for industrial image processing. First, the principle of”the brighter the better” term, applies through the industry because more light that strikes a surface, the shorter the exposure times can be achieved together with the camera. The result is more images per second and more data. Secondly, the systems are operated without extensive protective devices and comply with an eye-safe laser class. This pulse generator accomplishes this in one laser.
The FLEXPOINT MVpulse is available for wavelengths 640 nm, 660 nm, And 780 nm, and provides output powers of 10 mW to 100 mW at heart Lengths between 15 ms and 0.38 ms.