NewsUpgraded Portable 400G Network Tester MT1040A Functions

Upgraded Portable 400G Network Tester MT1040A Functions

Category articles

Installing this brand-new MT1040A-020 choice in the MT1040A sustains simultaneous dual-port 400G Ethernet (400GbE) measurements utilizing a mix of two 400G measurement modules. Therefore, given that data Tx and also Rx examinations can be carried out at the same time, it is possible to both test networks as well as step the latency as well as perform quality examinations of 400G tools successfully making use of just one MT1040A system. In addition, screening of 200GbE used in information centers is also supported.

By upgrading the MT1040A functions to support 400GbE in action to consumers’ requirements, Anritsu is contributing to the deployment and also smooth procedure of high-speed networks.

[Development Background]
With the start of 5G solutions as well as the spread of Cloud computer, as well as the fast boost in teleworking, supporting boosted network rates and larger data abilities has actually become an immediate concern for communications network operators. Consequently, demand for 400GbE is boosting as a way to manage reinforcement of these networks. However, setting up secure as well as high-speed, large-capacity networks utilizing 400GbE calls for cautious interest to bottom lines, such as guaranteeing the high quality of devices before building the total network.

On the other hand, minimizing network prices is a continuing demand, while the raising intricacy of network functions and examination things requires a test service offering simple assessment of network equipment.

[Product Outline]
The 400GbE Network Master Pro MT1040A is a mobile tester for examining the interactions quality of numerous network types running at speeds ranging from 10 Mbps to 400 Gbps. With its stackable arrangement of measurement components, the MT1040A can sustain synchronised dual-port 400GbE dimensions using a combination of 2 400G measurement components, facilitating high quality examinations (BER, throughput, frame loss/latency, and so on) of 400GbE equipment. In addition to supporting 400GbE, the MT1040A additionally sustains 200GbE, offering network drivers a cost-efficient, all-in-one high quality tester.

The helpful, automatic, one-button examination feature for pass/fail analysis of numerous test results cuts the examination worry and minimizes the requirement to sustain inexperienced drivers doing intricate on-site work.

[Extra item details]
[About 200GbE as well as dual-port 400GbE examinations]
[Trick Features]
Assessment of various multi-port communication networks with one tester: The MT1040A supports Ethernet, OTN, eCPRI/RoE/CPRI/ OBSAI, fiber channel, and also SDH/SONET network examinations. Simply one MT1040A unit is required to measure the BER, throughput, frame loss/latency of a combined interactions network set up making use of both the current optical and also tradition digital communications requirements.
Various measurement component combinations making use of stackable arrangement: The mix of MT1040A dimension modules can be reconfigured according to the test atmosphere by selecting the best setup for the test application. One 400G dimension module sustains on-site I&M, while 2 400G measurement modules facilitate network devices analysis at the lab benchtop. Additionally, adding an OTDR module to the main unit supports optical-fiber measurements.
Reliable work making use of automated screening as well as remote control: As well as using a controller, such as an exterior PC, the MT1040A can additionally perform standalone computerized screening and also pass/fail assessment, making it possible for even unskilled operators to run tests, review outcomes, as well as create records easily in the fastest time. Including the SORA Internet Cloud Service choice for instrument remote control helps increase network commissioning test effectiveness by facilitating fast troubleshooting of network troubles.

[Target Markets and Applications]

Target Markets: Network operators, installation and maintenance (I&M) contractors, equipment vendors

Applications: Quality evaluation, testing, installation, maintenance, and troubleshooting for communications networks and data centers

Michal Pukala
Electronics and Telecommunications engineer with Electro-energetics Master degree graduation. Lightning designer experienced engineer. Currently working in IT industry.